PROCENTEC VPGate MODBUS/TCP to Serial gateway

Exchange of data between a MODBUS TCP network and equipment with a serial link
Produktnummer: 110-00013A

The VPGate MODBUS TCP to serial is a gateway that enables the exchange of data between a MODBUS TCP network and equipment with a serial link. Data can easily be visualized by the user via an integrated webpage. In addition to relevant diagnostic alarms, this ensures the optimal integration of equipment in your network.

About VPGate MODBUS TCP to serial

The VPGate allows for effective diagnosis via the integrated webpage. Here the user can access maintenance information. The gateway has an integrated switch in addition to diagnostic LEDs on the front panel.

The VPGate is an economically attractive solution to enable integration in an existing network.

Main side
Connection: 2 Port / RJ-45
Protocols: MODBUS TCP
Features: auto-negotiation / auto crossover / auto polarization
Operation mode: MODBUS Client / MODBUS Server / MODBUS Gateway
Speed: 10 / 100 Mbps
Configuration method: Standard MODBUS program, web interface
Device access: HTTP (integrated webpage), FTP, SNMP, v1
I/O Capabilities: 1 input isolated 0 – 24 V, 1 relay output
Serial side
Connection: Full Duplex RS232, Half Duplex RS-485 via PIN Connector
Protocols: MODBUS RTU or ASCII Server / Transparent
Operation mode: MODBUS master or slave / Transparent
Speed: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 Kpbs
Data Exchange: 7 or 8 bits
Termination: Active for RS-485
Function supported: MODBUS: 1, 2, 3, 4, 5, 6, 7, 15, 16, 23
Transparent mode: end of frame karakter, known length, on timeout
Power supply: 12-30 VDC @ 1.7 W
Dimensions (LxWxH): 120 x 100 x 23 mm
Operating temperature: 0 .. 55 °C
Weight: 130 g